Generate New Ssh Key Debian

Translation(s): Deutsch - English - Français - Italiano - Español - Português Brasileiro

Contents

To do so follow these steps: Open up the Terminal. Type in the following command.

  1. Installation
  2. Configuration files
  3. Remote login
  4. Keys management
  5. Securing
    1. SSH Server
    2. SSH Client
  6. Additional Functions
  7. Additional Commands
    1. sftp
  8. Troubleshooting
    1. SSH hangs
    2. Keep SSH connection alive

ToDo: merge (and translate) this page and the french one (more complete)

Introduction

SSH stands for Secure Shell and is a protocol for secure remote login and other secure network services over an insecure network1. See Wikipedia - Secure Shell for more general information and ssh, lsh-client or dropbear for the SSH software implementations out of which OpenSSH is the most popular and most widely used2. SSH replaces the unencrypted telnet,rlogin and rsh and adds many features.

In this document we'll be using the OpenSSH command suite, it will also be assumed that the following two variables are defined:

So, if you want to use the recipes below, first set these variables to the remote computer name and the user name on that remote computer. Then cut and paste of the commands below should work. remote_host may also be an IP-address.

Installation

Installation of the client

Normally the client is installed by default. If not it suffices to run as root:

Installation of the server

The server allows to connect remotely and gets installed by running as root:

Configuration files

The main configuration files are in the directory /etc/ssh :

  • ssh_config : client configuration file

  • sshd_config : server configuration file

In addition this directory contains the private/public key pairs identifying your host :

  • ssh_host_dsa_key
  • ssh_host_dsa_key.pub
  • ssh_host_rsa_key
  • ssh_host_rsa_key.pub

Since OpenSSH 5.73, a new private/public key pair is available:

  • ssh_host_ecdsa_key
  • ssh_host_ecdsa_key.pub
Ssh key setup

Since OpenSSH 6.54, a new private/public key pair is available:

  • ssh_host_ed25519_key
  • ssh_host_ed25519_key.pub

Regenerating host keys

Remote login

With password

If you want to login to $remote_host as user $remote_user simply type

and then type in your password.

If the usernames on the local and the remote computer are identical, you can drop the $remote_user@-part and simply write

If this is the first time you login to the remote computer, ssh will ask you whether you are sure you want to connect to the remote computer. Answer 'yes' after you verified the remote computer's fingerprint, type in your password, and ssh will connect you to the remote host.

Using shared keys

One of the functions of ssh is using a pair of private/public keys to connect to a remote host. Also known as SSH keys. This method allows you to login to a remote host without typing your password every time. To do this you must generate a pair of private/public keys on your local machine and deposit the public key on the remote host.

To generate the key, use the program ssh-keygen as follows

This program generates a pair of private/public keys in the directory ~/.ssh. The program first asks for the destination files for the keys, by default located in ~/.ssh. Afterwards a passphrase is requested.

Note: We recommend not to leave the passphrase empty. An attacker who gets hold of your private key can otherwise connect to the hosts where you deposited you public key since the passphrase is empty. Choose a long and complex passphrase.

Your private key is id_rsa (don't give it to someone else), your public key is id_rsa.pub.

You copy your public key to a remote host with the command ssh-copy-id

Now you can connect simply to the remote host and the passphase is asked for. Once done, you get connected to the remote host. In case of a new connection the passphrase does not get asked for again during your entire session.

Keys management

Using GUI

Optionally, seahorse is a GNOME application which easily manage encryption keys and passwords through an intuitive Graphical User Interface (GUI). Seahorse is able to do various operations. Such as create SSH or PGP keys, configure them, and cache them. Read more.

Securing

SSH Server

By default a SSH server is relatively secure. With the help of some good practices, configuration options, and external utilities it is possible to make it even harder for 'robots' and crackers

Good practices with SSH Server

  • Apply openssh-server security updates as soon as possible. Which allows to protect against known security holes.

  • Activate SSH keys authentication only with passwords/passphrases. Deactivate password only authentication.

  • Consider using fail2ban which is a log file monitor that automatically bans an IP address after a predefined number of failed login attempts. Which automatically guards against brute-force attacks.

  • More good practices for using ssh at https://lackof.org/taggart/hacking/ssh/

Configuration Options

One should edit the file /etc/ssh/sshd_config to change the parameters and then restart the ssh server with

  • Deactivate using passwords for authentication (PasswordAuthentication no).

  • Deactivate using the root account (PermitRootLogin no).

  • Only allow login by certain users or groups (AllowUsers and AllowGroups)

The options AllowUsers and AllowGroups do not improve the security of a SSH server. But in certain cases their use allows to resist a brute force attack a little longer.

External Utilities

  • fail2ban : allows to automatically blacklist IPs attempting to brute force a SSH server with the help of iptables.

  • denyhosts : as fail2ban, denyhosts allows to block IP addresses trying to brute force a connection to ssh. But in contrast to fail2ban it does not use iptables, but the file /etc/hosts.deny.

SSH Client

Good practices with SSH Client

  • Apply openssh-client security updates as soon as possible. Which allows to protect against known security holes.

  • Use SSH keys authentication. Rather than password authentication.

  • Add strong passwords/passphrases to your SSH keys. This reduce risk of brute-force attacks.

Additional Functions

View files in GUI

In file managers like Konqueror, Dolphin, Krusader and Midnight Commander you can use FISH to view files in a GUI using:

Additional Commands

scp

scp is a command line utility allowing to transfer files between two machines.

  • Sending a file:
  • Copying a file to the local machine:

sftp

[empty for now]

text mode

[empty for now]

graphical mode

[empty for now]

clusterssh

[empty for now]

ssh-agent and ssh-add

ssh-agent is a useful utility to manage private keys and their passphrases. Most desktop environments in Debian will already be setup to run ssh-agent (through systemd user services or /etc/X11/Xsession), so you shouldn't need to start it manually.

You will still need to tell the agent to manage your keys.

When a private key is first needed, you are prompted for its passphrase. ssh-agent will then remember the key so that your passphrase doesn't get asked anymore.

keychain

Keychain, provided by the package keychain, is a shell script allowing to use the ssh agent in multiple sessions of the same computer. In effect after the first start ssh-agent creates a permanent socket allowing the communication with ssh. This socket is referenced only in the environment of the session in which the agent was started. Keychain allows to detect the agent and propagate the access to this agent to other sessions; this allows to use a single instance of ssh-agent per user on a machine.

ssh-askpass

ssh-askpass is an utility to simply the question for the password of a private key when using it. Several implementations exist:

  • x11-ssh-askpass : version for X11

  • kaskpass : integration of ssh-askpass into the KDE environment

  • ssh-askpass-gnome : integration of ssh-askpass into the Gnome environment

libpam-usb

libpam-usb is an utility (only available up to Debian Jessie) allowing authentication with an USB stick. This package includes a useful utilty : pamusb-agent. This utility, once correctly configured, allows to load the SSH keys present on the USB stick once it is connected and to unload them when it is disconnected.

Remote commands

If you just want to run one command on the remote computer, you don't need to login. You can tell ssh to run the command without login, for instance,

lists all files with extension .txt on the remote computer. This works with single tick quotes '...' as shown here, with double tick quotes '...', and without quotes. There may be differences between these three cases, though, not yet documented here.

SSH into Debian from another OS

  • PuTTY is a terminal emulator application which can act as a client for ssh. It's widely used by Windows users.

  • Wikipedia has Comparison_of_SSH_clients

Good practices of SSH usage

You must read this: https://lackof.org/taggart/hacking/ssh/

This document sums up many good practices that regular SSH users should follow in order to avoid compromising the security of their accounts (and of the whole machine at the same time).

Configure your ~/.ssh/config to send only the right key.

Troubleshooting

OpenSSL version mismatch. Built against 1000105f, you have 10001060

If you get an error message like this when starting the ssh daemon, you need to run:

Also see bug #732940.

SSH hangs

Issue

You are trying to SSH into a remote computer. But during SSH log-in the session hangs/freezes indefinitely. Thus you are not presented with the command prompt. And you are not able to use any SSH commands When using SSH debug mode the session hangs at this line debug2: channel 0: open confirm rwindow 0 rmax 32768

Possible cause

With some routers behind NAT and when using OpenSSH. During session setup, after the password has been given, OpenSSH sets the TOS (type of service) field in the IP datagram. The router choke on this. The effect is that your SSH session hangs indefinitely. In other words, SSH commands or connections are seldom working or not working at all.

Resolution with IPQoS 0x00

Until your router manufacturer fix their firmware. Here is one option to resolve that issue:

  1. Double check your openssh-server and openssh-client version are 5.7 or more recent. For example the resolution below should work with Debian 7.11 Wheezy or more recent as it comes with OpenSSH version 6.0.

  2. Edit one of the following two files located at:

    or

    Note: config file is per user and ssh_config file is for all users and system wide. If unsure edit the appropriate user config file.

    File content before

    File content after

  3. If you have any Terminal/Console window(s) already open. Fully close all of them. Doing so will close any active SSH sessions.
  4. No need to restart OpenSSH or your Debian. Try again to SSH into any remote server. It should work. Done you have successfully fixed that issue

    Thanks to Joe and catmaker for this tip

    Related documentation at https://www.openssh.com/txt/release-5.7

Resolution with netcat

WARNING: It is suggested to consider using that other resolution with IPQoS 0x00 instead of using netcat/ProxyCommand nc %h %p option. Because IPQoS 0x00 is the official built-in OpenSSH option. Also IPQoS 0x00 is a more direct way to resolve that issue, and potentially more secure option. Because IPQoS 0x00 uses SSH's built in encryption for secure transfers. Compare to netcat's not encrypted transfers. Sources: 12. If you choose to use netcat/ProxyCommand nc %h %p option read on.

Another option to resolve that SSH hangs issue is to use ProxyCommand nc %h %p. To do so follow the same steps as that above resolution with IPQoS 0x00. But replace IPQoS 0x00 with

Keep SSH connection alive

Ssh

For security reason, by default a SSH connection is automatically closed after a set period of time. But in some cases you want to keep that connection open. Such as cloud storage over SSH connection.

WARNING: Before activating that keep SSH connection alive option. It is suggested to consider securing both your SSH Client and SSH Server. Because for example, there is a risk that if your users leave their SSH session open, and their computer unattended and unlocked. Anyone can approach that computer, then exploit that open SSH connection. For example by using the passwd command, and change the password. And thus gain access to the server. In other words, before activating that keep SSH connection alive option, it is suggested to use your best judgment and good security practices.

For Debian 7.x server

Steps to keep SSH connection alive.

On the SSH server edit /etc/ssh/sshd_config file and add the following at the bottom of that file.

As root user restart the SSH service:

Please note that on recent Debian systems (e.g. Wheezy 7 with current updates as of Nov. 2015), the above command no longer works and returns the error:

However, the following works:

See also

  • screen - terminal multiplexer with VT100/ANSI terminal emulation

  • tmux - alternative terminal multiplexer

CategoryNetworkCategorySoftware

  1. https://tools.ietf.org/html/rfc4252 (1)

  2. https://www.openssh.com/users.html (2)

  3. https://www.openssh.com/txt/release-5.7 (3)

  4. https://www.openssh.com/txt/release-6.5 (4)

Translation(s): Deutsch - English - Français - Italiano - Español - Português Brasileiro

Contents

  1. Installation
  2. Configuration files
  3. Remote login
  4. Keys management
  5. Securing
    1. SSH Server
    2. SSH Client
  6. Additional Functions
  7. Additional Commands
    1. sftp
  8. Troubleshooting
    1. SSH hangs
    2. Keep SSH connection alive

ToDo: merge (and translate) this page and the french one (more complete)

Introduction

SSH stands for Secure Shell and is a protocol for secure remote login and other secure network services over an insecure network1. See Wikipedia - Secure Shell for more general information and ssh, lsh-client or dropbear for the SSH software implementations out of which OpenSSH is the most popular and most widely used2. SSH replaces the unencrypted telnet,rlogin and rsh and adds many features.

In this document we'll be using the OpenSSH command suite, it will also be assumed that the following two variables are defined:

So, if you want to use the recipes below, first set these variables to the remote computer name and the user name on that remote computer. Then cut and paste of the commands below should work. remote_host may also be an IP-address.

Installation

Installation of the client

Normally the client is installed by default. If not it suffices to run as root:

Installation of the server

The server allows to connect remotely and gets installed by running as root:

Configuration files

Ssh

The main configuration files are in the directory /etc/ssh :

  • ssh_config : client configuration file

  • sshd_config : server configuration file

In addition this directory contains the private/public key pairs identifying your host :

  • ssh_host_dsa_key
  • ssh_host_dsa_key.pub
  • ssh_host_rsa_key
  • ssh_host_rsa_key.pub

Since OpenSSH 5.73, a new private/public key pair is available:

  • ssh_host_ecdsa_key
  • ssh_host_ecdsa_key.pub

Since OpenSSH 6.54, a new private/public key pair is available:

  • ssh_host_ed25519_key
  • ssh_host_ed25519_key.pub

Regenerating host keys

Remote login

With password

If you want to login to $remote_host as user $remote_user simply type

and then type in your password.

If the usernames on the local and the remote computer are identical, you can drop the $remote_user@-part and simply write

If this is the first time you login to the remote computer, ssh will ask you whether you are sure you want to connect to the remote computer. Answer 'yes' after you verified the remote computer's fingerprint, type in your password, and ssh will connect you to the remote host.

Using shared keys

One of the functions of ssh is using a pair of private/public keys to connect to a remote host. Also known as SSH keys. This method allows you to login to a remote host without typing your password every time. To do this you must generate a pair of private/public keys on your local machine and deposit the public key on the remote host.

To generate the key, use the program ssh-keygen as follows

This program generates a pair of private/public keys in the directory ~/.ssh. The program first asks for the destination files for the keys, by default located in ~/.ssh. Afterwards a passphrase is requested.

Note: We recommend not to leave the passphrase empty. An attacker who gets hold of your private key can otherwise connect to the hosts where you deposited you public key since the passphrase is empty. Choose a long and complex passphrase.

Your private key is id_rsa (don't give it to someone else), your public key is id_rsa.pub.

You copy your public key to a remote host with the command ssh-copy-id

Now you can connect simply to the remote host and the passphase is asked for. Once done, you get connected to the remote host. In case of a new connection the passphrase does not get asked for again during your entire session.

Keys management

Using GUI

Optionally, seahorse is a GNOME application which easily manage encryption keys and passwords through an intuitive Graphical User Interface (GUI). Seahorse is able to do various operations. Such as create SSH or PGP keys, configure them, and cache them. Read more.

Securing

SSH Server

By default a SSH server is relatively secure. With the help of some good practices, configuration options, and external utilities it is possible to make it even harder for 'robots' and crackers

Good practices with SSH Server

  • Apply openssh-server security updates as soon as possible. Which allows to protect against known security holes.

  • Activate SSH keys authentication only with passwords/passphrases. Deactivate password only authentication.

  • Consider using fail2ban which is a log file monitor that automatically bans an IP address after a predefined number of failed login attempts. Which automatically guards against brute-force attacks.

  • More good practices for using ssh at https://lackof.org/taggart/hacking/ssh/

Configuration Options

One should edit the file /etc/ssh/sshd_config to change the parameters and then restart the ssh server with

  • Deactivate using passwords for authentication (PasswordAuthentication no).

  • Deactivate using the root account (PermitRootLogin no).

  • Only allow login by certain users or groups (AllowUsers and AllowGroups)

The options AllowUsers and AllowGroups do not improve the security of a SSH server. But in certain cases their use allows to resist a brute force attack a little longer.

External Utilities

  • fail2ban : allows to automatically blacklist IPs attempting to brute force a SSH server with the help of iptables.

  • denyhosts : as fail2ban, denyhosts allows to block IP addresses trying to brute force a connection to ssh. But in contrast to fail2ban it does not use iptables, but the file /etc/hosts.deny.

SSH Client

Good practices with SSH Client

  • Apply openssh-client security updates as soon as possible. Which allows to protect against known security holes.

  • Use SSH keys authentication. Rather than password authentication.

  • Add strong passwords/passphrases to your SSH keys. This reduce risk of brute-force attacks.

Additional Functions

View files in GUI

In file managers like Konqueror, Dolphin, Krusader and Midnight Commander you can use FISH to view files in a GUI using:

Additional Commands

Create Ssh Key Debian

scp

scp is a command line utility allowing to transfer files between two machines.

  • Sending a file:
  • Copying a file to the local machine:

sftp

[empty for now]

text mode

[empty for now]

graphical mode

[empty for now]

clusterssh

[empty for now]

ssh-agent and ssh-add

ssh-agent is a useful utility to manage private keys and their passphrases. Most desktop environments in Debian will already be setup to run ssh-agent (through systemd user services or /etc/X11/Xsession), so you shouldn't need to start it manually.

You will still need to tell the agent to manage your keys.

When a private key is first needed, you are prompted for its passphrase. ssh-agent will then remember the key so that your passphrase doesn't get asked anymore.

keychain

Keychain, provided by the package keychain, is a shell script allowing to use the ssh agent in multiple sessions of the same computer. In effect after the first start ssh-agent creates a permanent socket allowing the communication with ssh. This socket is referenced only in the environment of the session in which the agent was started. Keychain allows to detect the agent and propagate the access to this agent to other sessions; this allows to use a single instance of ssh-agent per user on a machine.

ssh-askpass

ssh-askpass is an utility to simply the question for the password of a private key when using it. Several implementations exist:

  • x11-ssh-askpass : version for X11

  • kaskpass : integration of ssh-askpass into the KDE environment

  • ssh-askpass-gnome : integration of ssh-askpass into the Gnome environment

libpam-usb

libpam-usb is an utility (only available up to Debian Jessie) allowing authentication with an USB stick. This package includes a useful utilty : pamusb-agent. This utility, once correctly configured, allows to load the SSH keys present on the USB stick once it is connected and to unload them when it is disconnected.

Remote commands

If you just want to run one command on the remote computer, you don't need to login. You can tell ssh to run the command without login, for instance,

lists all files with extension .txt on the remote computer. This works with single tick quotes '...' as shown here, with double tick quotes '...', and without quotes. There may be differences between these three cases, though, not yet documented here.

SSH into Debian from another OS

  • PuTTY is a terminal emulator application which can act as a client for ssh. It's widely used by Windows users.

  • Wikipedia has Comparison_of_SSH_clients

Good practices of SSH usage

You must read this: https://lackof.org/taggart/hacking/ssh/

This document sums up many good practices that regular SSH users should follow in order to avoid compromising the security of their accounts (and of the whole machine at the same time).

Configure your ~/.ssh/config to send only the right key.

Troubleshooting

OpenSSL version mismatch. Built against 1000105f, you have 10001060

If you get an error message like this when starting the ssh daemon, you need to run:

Also see bug #732940.

SSH hangs

Issue

You are trying to SSH into a remote computer. But during SSH log-in the session hangs/freezes indefinitely. Thus you are not presented with the command prompt. And you are not able to use any SSH commands When using SSH debug mode the session hangs at this line debug2: channel 0: open confirm rwindow 0 rmax 32768

Possible cause

With some routers behind NAT and when using OpenSSH. During session setup, after the password has been given, OpenSSH sets the TOS (type of service) field in the IP datagram. The router choke on this. The effect is that your SSH session hangs indefinitely. In other words, SSH commands or connections are seldom working or not working at all.

Resolution with IPQoS 0x00

Until your router manufacturer fix their firmware. Here is one option to resolve that issue:

  1. Double check your openssh-server and openssh-client version are 5.7 or more recent. For example the resolution below should work with Debian 7.11 Wheezy or more recent as it comes with OpenSSH version 6.0.

  2. Edit one of the following two files located at:

    or

    Note: config file is per user and ssh_config file is for all users and system wide. If unsure edit the appropriate user config file.

    File content before

    File content after

  3. If you have any Terminal/Console window(s) already open. Fully close all of them. Doing so will close any active SSH sessions.
  4. No need to restart OpenSSH or your Debian. Try again to SSH into any remote server. It should work. Done you have successfully fixed that issue

    Thanks to Joe and catmaker for this tip

    Related documentation at https://www.openssh.com/txt/release-5.7

Resolution with netcat

WARNING: It is suggested to consider using that other resolution with IPQoS 0x00 instead of using netcat/ProxyCommand nc %h %p option. Because IPQoS 0x00 is the official built-in OpenSSH option. Also IPQoS 0x00 is a more direct way to resolve that issue, and potentially more secure option. Because IPQoS 0x00 uses SSH's built in encryption for secure transfers. Compare to netcat's not encrypted transfers. Sources: 12. If you choose to use netcat/ProxyCommand nc %h %p option read on.

Another option to resolve that SSH hangs issue is to use ProxyCommand nc %h %p. To do so follow the same steps as that above resolution with IPQoS 0x00. But replace IPQoS 0x00 with

Keep SSH connection alive

For security reason, by default a SSH connection is automatically closed after a set period of time. But in some cases you want to keep that connection open. Such as cloud storage over SSH connection.

WARNING: Before activating that keep SSH connection alive option. It is suggested to consider securing both your SSH Client and SSH Server. Because for example, there is a risk that if your users leave their SSH session open, and their computer unattended and unlocked. Anyone can approach that computer, then exploit that open SSH connection. For example by using the passwd command, and change the password. And thus gain access to the server. In other words, before activating that keep SSH connection alive option, it is suggested to use your best judgment and good security practices.

For Debian 7.x server

Steps to keep SSH connection alive.

On the SSH server edit /etc/ssh/sshd_config file and add the following at the bottom of that file.

As root user restart the SSH service:

Please note that on recent Debian systems (e.g. Wheezy 7 with current updates as of Nov. 2015), the above command no longer works and returns the error:

However, the following works:

See also

  • screen - terminal multiplexer with VT100/ANSI terminal emulation

  • tmux - alternative terminal multiplexer

CategoryNetworkCategorySoftware

Ssh Key Github

  1. https://tools.ietf.org/html/rfc4252 (1)

  2. https://www.openssh.com/users.html (2)

  3. https://www.openssh.com/txt/release-5.7 (3)

  4. https://www.openssh.com/txt/release-6.5 (4)